Home cinema installation the Sapphire Realm TT203114W 2m tab tensioned projector screen was mounted above 42" Pioneer plasma TV. The screen was spaced off wall to clear the the plasma when lowered. Sound was provided 5.1 home cinema sound, pioneer av receiver and existing floor standing speakers.
Epson 5500 full HD projector, a 15m hdmi cable was chased into the wall to the wall mounted projector. The home theater was then setup and calibrated.

Panasonic 50 Plasma TV on chimney breast

This Panasonic 50" Plasma TV was installed by Master AV Services in London on a plasterboard chimney breast. There was a solid wall behind the plasterboard and we to use great care to minimize damage to the wall. There were a few holes

the cables were hidden through the wall. As you can see from the picture, the leads emerged from the wall via a brush plate by the AV cabinet. HDMI cables were run for Blue Ray DVD, Sky HD, the Wii

was converted to run component video. This increases the the resolution, we also run RCA audio out from screen for possible future Home cinema installation.

Sky HD and LG home cinema fitting to shelf unit

This shows us wiring up the home cinema and Sky HD as part of the install AV shelf unit.

Toshiba LCD and home cinema installation

This Toshiba LCD and home cinema installation involved chasing all the cables into the wall on the chimney breast. All the equipment

• Sky HD
  
• AV receiver, Denon AV-3808
  
• PS3
  

were located in the next room. Speaker package was Antony Gallo, Gallo Nucleus Micro Speaker Pack.

All the equipment was controlled via a remote relay. This clever device receives IR signals and converts them to RF. They can then past through walls up to 30M. The IR receiver which sits close to the Audio Visual equipment converts the signal back to IR which then controls the AV receiver etc. Speakers were fitted up at ceiling level. This wasn't our recommendation but instructed by the client. The walls were then plastered to undercoat finish ready for decoration.